XZP40T | Microwave Photodetector integrates a high-speed PIN photodiode and a low-noise transimpedance amplifier (TIA) into an airtight box module.
XZP40T | Microwave Photodetector integrates a high-speed PIN photodiode and a low-noise transimpedance amplifier (TIA) into an airtight box module. The optical input is supplied through a single-mode fiber and the receiver is designed to operate up to 40 Gbps optical transmission.
FEATURES
| Operating Temperature | -4–185 °F (-20–85 °C) |
|---|---|
| Response Spectrum | 1100–1650 nm |
| Responsivity | 0.55 A/W |
| Optical Return Loss | 30–35 |
| Sensitivity | -10 dBm |
| Max. Optical Input Power | 1-3 mW |
| Supply Current | 70-100 mA |
| Supply Voltage | 3.0-3.6 V |
| Transimpedance Gain | 2 kΩ |
| Limited Output Voltage Swing | 140-150 mVpp |
| 3 dB Bandwidth | 28 GHz |
| Low Frequency Cutoff | 10-100 MHz |
| Output Resistance | 95–105 Ω |
CUSTOM CONFIGURATIONS
Customize the fiber type, optical connector, and RF connector using the following code system:
| Code | Fiber Type |
|---|---|
| 1 | 9 / 125 SM |
| 2 | 50 / 125 MM |
| Code | Optical Connector |
|---|---|
| 0 | No connector |
| 1 | FC / APC |
| 2 | FC / PC |
| 3 | Custom |
| Code | RF Connector |
|---|---|
| K | SMA-K / Female |
| J | SMA-J / Male |
| Code | Wavelength Range |
|---|---|
| L | Long wavelengths |
| S | Short wavelengths |
| A | All wavelengths |
DATA SHEET
To request a full data sheet, please contact us.
